agnes-the-ai-analyst/tests/test_e2e_privacy.py
minasarustamyan 19c5a7592a
Session capture queue, private session, and setup-prompt fixes (#242)
* Capture session paths via SessionStart hook + lock parallel pushes

Replace the encoding-based scan of ~/.claude/projects/<encoded-cwd>/ with
a queue file populated by a new `agnes capture-session` SessionStart hook.
The hook reads the documented `transcript_path` field from Claude Code's
hook stdin JSON, sidestepping the cwd-to-folder encoding (which is an
internal implementation detail and varies by Claude Code version).

- New `agnes capture-session` subcommand appends transcript_path to
  <workspace>/.claude/agnes-sessions.txt. Silent on all malformed input
  so a hook chain failure doesn't clutter Claude Code startup.
- `agnes push` now consumes the queue: atomic snapshot rename guards
  against hooks writing during the push window, successful uploads land
  in agnes-sessions-uploaded.txt (TSV: timestamp + path), failed paths
  are requeued.
- Cross-platform single-instance lock via the filelock package (fcntl
  on POSIX, msvcrt on Windows). Concurrent SessionEnd hooks — common
  when the user closes several sessions at once — silent-exit on the
  losing side instead of all racing the upload.
- Recovery: pre-existing snapshot files from a crashed push are picked
  up and processed before the live queue.
- The SessionStart `agnes push` self-heal entry is dropped — it became
  redundant once the queue persists across runs (orphans from headless /
  crashed sessions ship out on the next interactive SessionEnd push).
  Existing workspaces auto-migrate via the marker-based replace logic.
- Legacy encoding scan stays available behind `--legacy-scan` for one-
  off backfills of sessions predating the queue.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

* Add /agnes-private + statusLine indicator for private sessions

Users handling sensitive data inside Claude Code can now opt a session
out of the Agnes upload pipeline, either proactively (right after session
start) or reactively (mid-session). The `/agnes-private` slash command
runs `agnes mark-private` deterministically via `!`-prefix direct bash —
no AI in the loop. A workspace-installed statusLine surfaces a
`🔒 agnes-private` indicator in Claude Code's status bar so the user
sees the state at a glance.

Authoritative source of "do not upload" is a separate file
`<workspace>/.claude/agnes-sessions-private.txt` (one session_id per
line). Both `capture-session` (queue writer) and `push` (queue reader)
consult the list. This makes the slash-command / SessionStart-hook race
impossible by construction: whichever runs first, the session is correctly
filtered out.

- `agnes mark-private` reads `CLAUDE_CODE_SESSION_ID` from env (set by
  Claude Code in every bash subprocess it spawns — stable documented API)
  and appends to the private list.
- `agnes statusline` reads the session JSON Claude Code pipes on stdin,
  checks the private list, and emits the indicator or nothing. Optimized
  for the high call frequency of statusLine renders.
- `capture-session` extracts session_id from hook stdin and skips queue
  write when the ID is already on the private list (race protection).
- `push` filters snapshot entries by the private list and appends to a
  per-workspace audit log `agnes-sessions-private-skipped.txt`.
- Queue format migrated from `<path>` to `<session_id>\t<path>`; legacy
  one-column lines still parse (empty session_id, still upload, can't be
  marked private retroactively — fine, they pre-date the feature).
- `install_claude_hooks` writes a workspace statusLine unless the user
  already has a custom one (warn + preserve). Idempotent re-init.
- `install_claude_commands` ships `agnes-private.md` alongside
  `update-agnes-plugins.md`. Per-template fallback so a missing template
  doesn't get clobbered with the wrong content.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

* Fix setup-prompt + CLAUDE.md marketplace copy + drop skills step

Three issues against the post-PR-#240 / post-PR-#237 state:

1. Setup prompt's marketplace block trailer (both has-stack and
   empty-stack variants) claimed the SessionStart hook keeps the
   marketplace clone in sync via `agnes refresh-marketplace --quiet`
   on every session and that admin grants land automatically — both
   false since PR #237 (0.47.x) moved the install/update path out of
   the hook into the `/update-agnes-plugins` slash command. The hook
   is `--check`-only: detects server-side changes, prompts the user
   to run the slash command, which does the full reconcile
   interactively with output visible in the transcript.

2. The empty-stack variant framed composition as "admin grants only",
   missing the actual three-source served stack:
     (admin RBAC ∩ /marketplace subscriptions)
       ∪ system-mandatory plugins (admin-pinned, auto-applied)
       ∪ Flea market installs (skills/agents bundled, plugins standalone)
   Updated copy spells out all three sources so analysts know where
   their stack picks live, and what the SessionStart hook actually
   does on change detection.

3. CLAUDE.md template's "Agnes Marketplace" section conflated
   eligibility (`resolve_allowed_plugins` — what's listed) with served
   stack (`resolve_user_marketplace` — what actually reaches Claude
   Code). The two are different: a user can be RBAC-eligible for a
   plugin without having subscribed to it on /marketplace. Rewrote
   the section to distinguish the eligibility set from the served
   stack and to describe the `--check`-only hook accurately.

Plus: deleted the setup prompt's interactive Skills step (final step
before Confirm). The named-opinion question — "do you want me to
bulk-copy every skill into ~/.claude/skills/agnes/ or pull on-demand
via `agnes skills show <name>`?" — had no obvious right answer for
new users at the tail end of a wall of technical steps. On-demand
lookup is the one-size-fits-all default; `agnes skills list/show`
remain discoverable and the CLAUDE.md template references specific
skills inline (e.g. agnes-data-querying in the BigQuery section)
where they're relevant. Layout: Confirm shifts from step 9 to step 8.

Tests updated, full setup/marketplace/welcome surface green (115
passed). Remaining full-suite failures are pre-existing (BQ/Keboola
fixtures, Windows charmap collection error in test_v26_keboola_e2e)
— verified against a clean stash, unrelated to this diff.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

* Fix session-queue race + snapshot PID-reuse data loss

Two blocker fixes from the PR #242 review:

1. Concurrent SessionStart hooks could corrupt the queue file on
   Windows. Python's `open(path, "a")` is not atomic there — the CRT
   does not pass FILE_APPEND_DATA to CreateFile, so concurrent
   appenders (user opening several Claude Code windows simultaneously)
   could interleave bytes mid-line. The malformed lines then silently
   fail the parser and the entries are dropped.

   Fix: wrap append_to_queue, requeue_failed, and snapshot_queue in a
   short-lived FileLock on a dedicated `agnes-queue.lock`. Separate
   from `agnes-push.lock` so capture-session hooks don't block on the
   push command. New test_append_concurrent_threads_no_corruption
   reproduces the race with 4 threads x 50 appends.

2. Snapshot filenames embedded only the PID (`agnes-sessions.snapshot.
   <PID>.txt`). After a crashed push left a snapshot on disk and the
   OS recycled the PID for a new push, `os.rename` would atomically
   overwrite the recovery snapshot — every entry in it lost, silently.

   Fix: append a uuid8 hex tail (`agnes-sessions.snapshot.<PID>.
   <uuid8>.txt`). find_recovery_snapshots already globs the prefix
   so it picks up both old and new format. New
   test_snapshot_filename_is_unique_per_call asserts two consecutive
   snapshots under the same PID don't collide.

Targeted tests green (47/47 in session_queue/capture_session/cli_push).
Full suite failures unchanged from baseline (pre-existing BQ/Keboola
fixture issues per CLAUDE.md).

* Auto-refresh workspace hooks + bash-wrap all hook entries (Windows)

Fixes from PR #242 second review (ZdenekSrotyr):

1. `uv.lock` regenerated to include `filelock 3.29.0` (declared in
   pyproject.toml but missing from the lock file — CI's
   lockfile-consistency check would fail; `uv pip install` on a clean
   cache would silently miss the dep).

2. `agnes self-upgrade` now auto-refreshes the workspace Claude Code
   hooks via the new `cli.lib.hooks.maybe_refresh_claude_hooks`. Closes
   the silent-stop migration gap: a v0.48 workspace would auto-upgrade
   the CLI from its existing SessionStart self-upgrade entry but never
   pick up the new `agnes capture-session` SessionStart hook, leaving
   the queue empty and `agnes push` uploading nothing.

   The refresh fires on both the "info is None" fast path (CLI already
   current — catches the second SessionStart after a prior upgrade)
   and the install-success path. Guarded by `workspace_has_agnes_hooks`
   so it never writes `.claude/settings.json` into directories that
   aren't Agnes workspaces (e.g. `agnes self-upgrade` invoked from
   `~/`). Errors are surfaced on stderr but never flip the upgrade exit
   code.

3. All Agnes-managed hooks are now wrapped in `bash -c "..."`. The
   self-upgrade+pull chained SessionStart entry was the only one still
   shipping unwrapped — Claude Code on Windows runs hook commands
   directly without a shell, so the `;` chain + `2>/dev/null` +
   `|| true` shell syntax silently no-op'd on native Windows installs
   without Git Bash on PATH. Workspaces still on the old form
   auto-upgrade via the refresh path above.

Tests: +12 in test_lib_hooks.py (guard semantics, v0.48→v0.49
migration end-to-end, third-party-hook preservation, bash-wrap
invariant). +5 in test_self_upgrade.py (refresh fires on info=None,
fires on install success, skipped on failure, skipped on --check-only,
refresh failure never flips exit code).

130 targeted tests green. The 2 pre-existing Windows path-separator
failures in `test_smoke_test_detects_version_mismatch[uv|pip]` are
unrelated (path mismatch `\fake\uv\bin\agnes` vs `/fake/uv/bin/agnes`
in test asserts, pre-PR baseline).

* CHANGELOG: document PR-242 main features

Closes ZdenekSrotyr #4: the [Unreleased] block was missing entries for
the PR's primary surface — only the post-merge fix bullets and the
unrelated setup-prompt copy change were captured. Adds:

- ### Added: 6 bullets covering the session capture queue + new
  `agnes capture-session` subcommand, `/agnes-private` slash + `agnes
  mark-private`, `agnes statusline` + statusLine wiring, `--legacy-scan`
  opt-in fallback, single-instance push lock, and the new `filelock`
  runtime dep.

- ### Changed: BREAKING bullet on the SessionStart / SessionEnd hook
  wire format change (capture-session as first SessionStart entry,
  push self-heal removed, SessionEnd push detached via nohup, all
  entries bash-wrapped). Folds the prior standalone bash-wrap bullet
  into this consolidated entry — Z's review flagged the layout shift
  as BREAKING, and grouping the related sub-changes makes the
  migration story readable in one place.

- Operator migration is auto-handled by `maybe_refresh_claude_hooks`
  invoked from `agnes self-upgrade` (separate Changed entry below).
  No `agnes init` re-run required. Pre-queue session jsonls on
  upgrading workspaces still need a one-off `agnes push --legacy-scan`
  — flagged in the BREAKING bullet.

No code change; doc only.

* Drop permanent 4xx uploads instead of requeueing forever

Closes ZdenekSrotyr #5. Previously the push retry path requeued any
non-200 response except the literal "file not found on disk", so 401
(token expired), 403 (RBAC denial), 413 (payload too large), 400
(server-side validation) cycled through every push run forever — the
queue grew without bound and each run re-bombarded the server with the
same deterministically-failing upload.

Now 4xx (except 408 Request Timeout + 429 Too Many Requests, which the
HTTP spec marks as transient) is dropped and audit-logged to
`<workspace>/.claude/agnes-sessions-failed.txt`:

    <iso_ts>\t<session_id>\t<status>\t<transcript_path>

5xx and network errors continue to requeue — those reflect server /
transport state that can change between runs, so retry is the right
behavior.

The audit log piggybacks on the push single-instance lock
(agnes-push.lock) — push is the only writer to this file, same as the
existing `mark_uploaded` and `mark_private_skipped` paths, so no
separate filelock is needed.

`agnes push --json` surfaces a new `dropped_permanent` counter; non-
quiet stdout mentions the audit-log path so operators tailing the
output have a pointer to the forensic trail.

Tests: +7 in test_cli_push.py (401/400/403/413 → drop; 408/429 →
requeue; 500/502/503 → requeue; network exception → requeue;
--json `dropped_permanent` counter; stdout audit-log pointer). +1 in
test_session_queue.py (mark_failed_permanent TSV format).

127/129 targeted tests green. The 2 pre-existing Windows
path-separator failures in `test_smoke_test_detects_version_mismatch
[uv|pip]` are unrelated (path mismatch `\fake\uv\bin\agnes` vs
`/fake/uv/bin/agnes` in test asserts, pre-PR baseline).

* Catch OSError in push lock acquisition

Closes ZdenekSrotyr #8. `acquire_or_skip` in `cli/lib/push_lock.py`
previously caught only `filelock.Timeout`. Any `OSError` from
`FileLock.acquire` — read-only filesystem, permission denied on
`.claude/`, disk full, hardware I/O failure — propagated as an
unhandled traceback.

Two visible failure modes:
- SessionEnd hook: `|| true` in the wrapper swallowed the error, so
  daily pushes silently never ran. Operator had no signal.
- Manual `agnes push`: ugly Python traceback dumped to the terminal
  instead of a clean exit.

Now `OSError` is treated the same as `Timeout` — yield `None`, caller
returns cleanly with rc=0. The operator's environment in these
scenarios has bigger problems than missing session uploads, so we
swallow rather than retry-loop or surface a noisy warning.

Test: `test_push_silent_exit_when_filelock_raises_oserror` patches
the `FileLock` used inside `push_lock` to raise OSError on acquire,
verifies push exits 0 with no traceback and the queue is preserved
for the next attempt.

* Address remaining S2 items from PR-242 review

Four items from ZdenekSrotyr's S2 list:

S2.10 — `_install_statusline` truthy check (cli/lib/hooks.py): replace
`if existing:` with explicit `if existing is None or existing == "":`.
Documents and tests the behavior for both edge cases (explicit-null
and empty-string `statusLine`) — both treated as "not configured"
rather than "explicit user opt-out", so we install ours. Two new
tests in test_lib_hooks.py pin the contract.

S2.6 — onboarding docs for /agnes-private. New "Private sessions"
subsection in `config/claude_md_template.txt` (next to Data Sync)
covering the slash command, statusbar indicator, and audit-log
location. One-line tip in `app/web/setup_instructions.py` so the
feature is discoverable at onboarding.

S2.9 — e2e privacy test (tests/test_e2e_privacy.py). Wires
capture_session → mark_private → push against a recording fake
api_post and asserts zero session uploads for the marked one.
Three cases: mark-before-capture (queue write skipped),
mark-after-capture (push-side filter catches it + audit-logs),
control (unmarked sessions upload normally).

David #8 — `--legacy-scan` help text now documents the
private-list gap (legacy entries carry empty session_id, so
the filter is not consulted). The practical impact is bounded —
pre-queue sessions cannot have been marked private since the
private list is a queue-era feature — but the disclaimer in the
help text means an operator running a backfill is not surprised.

68 targeted tests green (3 new e2e + 2 new truthy edge tests +
existing). 2 pre-existing Windows path-separator failures in
test_smoke_test_detects_version_mismatch[uv|pip] unchanged.

Remaining S2 items (statusline mkdir push-back, capture-session
silent-fail follow-up) handled in PR comment + follow-up issue
respectively.

* Address remaining S2 follow-ups (David #8, S2.7, David #11)

Three items left over from Mina's bbf63472 batch — that commit
addressed S2.6/S2.9/S2.10 + documented David #8 in help text but
deferred the actual implementations of S2.7, David #11, and the real
David #8 fix to follow-ups. This commit closes them.

David #8 — `agnes push --legacy-scan` now consults the private list.
Claude Code names jsonls `<session-id>.jsonl`, so the file stem IS
the session id; the legacy-scan path can apply the same private filter
the queue path uses. Both the dry-run and live-upload code paths fixed.
Help text updated (no longer warns the filter is bypassed). Two new
tests in test_cli_push.py cover the upload-skip path + the dry-run
`would_skip_private` segregation.

S2.7 — `statusline`/`is_private` no longer mkdir-pollutes arbitrary
workdirs. Split `_claude_dir` into `_claude_dir_writable` (used only
from `add_private`) and `_claude_dir_readonly` (no mkdir). The
read-only public helpers (`private_list_path`, `read_all_private`,
`is_private`) compose the no-mkdir variant by default; `add_private`
opts in via `writable=True`. Added a process-local mtime-keyed cache
around `read_all_private` so in-process callers (push doing one stat
per upload candidate, future `agnes diagnose`) don't re-parse the
file on every check. Cache eviction on `add_private` so a sub-second
write+read sequence doesn't see stale data even on coarse-mtime
filesystems. Two new tests pin the no-mkdir contract + the
in-same-second add+read consistency.

David #11 — `agnes capture-session` writes a breadcrumb log on every
invocation. New `<workspace>/.claude/agnes-capture-session.log` TSV:
`<iso_ts>\t<outcome>\t<detail>` where outcome covers every silent-
exit path (`ok`, `private_skip`, `empty_stdin`, `bad_json`,
`not_object`, `no_transcript_path`, `stdin_read_error`,
`write_error`). Gives operators a signal to detect "hook fires but
queue stays empty" — without it, an upstream Claude Code stdin-
contract change is invisible because the hook always exits 0. Log
rolls at 256 KiB so it doesn't grow unbounded on long-lived
workspaces. Best-effort: a breadcrumb-write failure is itself
swallowed so the hook contract stays "exit 0 always". Skipped in
non-Agnes workdirs (no `.claude/` exists) so opening Claude Code
in `~/` doesn't pollute it. Five new tests in test_capture_session.py
cover the success / bad_json / no_transcript_path / private_skip /
no-pollute paths.

115 targeted tests green (test_cli_push, test_capture_session,
test_private_list, test_session_queue, test_e2e_privacy,
test_lib_hooks, test_statusline, test_mark_private).

---------

Co-authored-by: Minas Arustamyan <arustamyan.minas@gmail.com>
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: ZdenekSrotyr <zdenek.srotyr@keboola.com>
2026-05-11 13:31:16 +00:00

208 lines
7.9 KiB
Python

"""End-to-end test pinning the user-visible privacy promise:
**a session marked /agnes-private never reaches the server.**
Each unit test (capture_session, mark_private, push, private_list) covers
its own component edge cases. This file wires them together against a
recording fake `api_post` to verify the cross-component contract — closes
ZdenekSrotyr S2.9 in PR #242.
The test exercises both race orderings:
- mark BEFORE capture (capture-session sees the private flag and skips
the queue write — entry never enters the upload pipeline)
- capture BEFORE mark (entry sits in the queue; push's per-entry
re-check against the private list filters it out and audit-logs)
"""
from __future__ import annotations
import json
from typer.testing import CliRunner
from cli.commands.capture_session import capture_session_app
from cli.commands.mark_private import mark_private_app
from cli.commands.push import push_app
from cli.lib.session_queue import (
failed_log_path,
private_skipped_log_path,
queue_path,
uploaded_log_path,
)
runner = CliRunner()
class _FakeResp:
def __init__(self, status_code: int = 200) -> None:
self.status_code = status_code
def _record_uploads(monkeypatch) -> list[tuple[str, dict]]:
"""Patch api_post to record every call. Sessions endpoint succeeds with
200; local-md endpoint also succeeds. Returns the recorder list."""
calls: list[tuple[str, dict]] = []
def _fake(endpoint, **kwargs):
calls.append((endpoint, kwargs))
return _FakeResp(200)
monkeypatch.setattr("cli.commands.push.api_post", _fake)
return calls
def _stub_push_config(monkeypatch) -> None:
monkeypatch.setattr("cli.commands.push.get_server_url", lambda: "http://x")
monkeypatch.setattr("cli.commands.push.get_token", lambda: "test-pat")
def _capture(workspace, session_id, transcript_path, monkeypatch) -> None:
"""Simulate a SessionStart hook firing `agnes capture-session` with the
real CC stdin payload shape."""
monkeypatch.setenv("AGNES_LOCAL_DIR", str(workspace))
payload = json.dumps({
"session_id": session_id,
"transcript_path": str(transcript_path),
"cwd": str(workspace),
"hook_event_name": "SessionStart",
})
result = runner.invoke(capture_session_app, [], input=payload)
assert result.exit_code == 0, result.output
def _mark_private(workspace, session_id, monkeypatch) -> None:
"""Simulate the user typing `/agnes-private` inside Claude Code —
`!`-prefix bash spawns `agnes mark-private` with CLAUDE_CODE_SESSION_ID
set to the active session."""
monkeypatch.setenv("AGNES_LOCAL_DIR", str(workspace))
monkeypatch.setenv("CLAUDE_CODE_SESSION_ID", session_id)
result = runner.invoke(mark_private_app, [])
assert result.exit_code == 0, result.output
def _uploaded_session_names(calls: list[tuple[str, dict]]) -> list[str]:
"""Extract the `name` field from every recorded /api/upload/sessions
multipart upload. Returns the list of jsonl filenames that reached
the (fake) server."""
out: list[str] = []
for endpoint, kwargs in calls:
if endpoint != "/api/upload/sessions":
continue
files = kwargs.get("files", {})
file_field = files.get("file")
if file_field is None:
continue
# `files={"file": (name, fh)}` — `_upload_one` in push.py
name = file_field[0] if isinstance(file_field, tuple) else None
if name is not None:
out.append(name)
return out
def test_e2e_mark_before_capture_session_never_uploads(tmp_path, monkeypatch):
"""User marks /agnes-private *before* the SessionStart hook runs
capture-session. The capture-session call sees the session_id is on
the private list and skips the queue write entirely — the upload
pipeline never even sees it."""
_stub_push_config(monkeypatch)
calls = _record_uploads(monkeypatch)
private_id = "private-session"
private_transcript = tmp_path / "private.jsonl"
private_transcript.write_text("{}\n")
# Step 1: user runs /agnes-private (e.g. typed it before any
# SessionStart hook reached capture-session).
_mark_private(tmp_path, private_id, monkeypatch)
# Step 2: SessionStart hook fires capture-session. It must see the
# private flag and skip the queue write.
_capture(tmp_path, private_id, private_transcript, monkeypatch)
# Queue must be empty / absent — capture-session bailed before write.
assert not queue_path(tmp_path).exists() or \
queue_path(tmp_path).read_text(encoding="utf-8") == ""
# Step 3: push runs (e.g. SessionEnd fires it).
result = runner.invoke(push_app, ["--quiet"])
assert result.exit_code == 0, result.output
# Assert: nothing reached the (fake) server.
assert _uploaded_session_names(calls) == [], (
f"Private session must not upload; got: {_uploaded_session_names(calls)}"
)
# And no uploaded-log entry was written.
assert not uploaded_log_path(tmp_path).exists()
def test_e2e_capture_before_mark_filters_at_push(tmp_path, monkeypatch):
"""User marks /agnes-private *after* capture-session has already
queued the transcript (typical scenario — user types the slash
command mid-session). The entry sits in the queue; push's per-entry
re-check against the private list filters it out at the last moment
and audit-logs the skip."""
_stub_push_config(monkeypatch)
calls = _record_uploads(monkeypatch)
private_id = "private-session"
private_transcript = tmp_path / "private.jsonl"
private_transcript.write_text("{}\n")
public_id = "public-session"
public_transcript = tmp_path / "public.jsonl"
public_transcript.write_text("{}\n")
# Step 1: SessionStart hooks fire capture-session for BOTH sessions.
# Neither is private yet, so both land in the queue.
_capture(tmp_path, private_id, private_transcript, monkeypatch)
_capture(tmp_path, public_id, public_transcript, monkeypatch)
# Sanity: queue has both entries.
queue_lines = queue_path(tmp_path).read_text(encoding="utf-8").splitlines()
assert len(queue_lines) == 2
# Step 2: user marks one of them /agnes-private mid-session.
_mark_private(tmp_path, private_id, monkeypatch)
# Step 3: push runs.
result = runner.invoke(push_app, ["--quiet"])
assert result.exit_code == 0, result.output
# Assert: ONLY the public session reached the (fake) server.
uploaded = _uploaded_session_names(calls)
assert uploaded == ["public.jsonl"], (
f"Only the non-private session should upload; got: {uploaded}"
)
# Audit log records the skipped private entry — the forensic trail.
skipped_log = private_skipped_log_path(tmp_path).read_text(encoding="utf-8")
assert private_id in skipped_log
assert "private.jsonl" in skipped_log
# Failed log MUST be empty — private skip is not a failure, just
# an intentional exclusion.
assert not failed_log_path(tmp_path).exists()
def test_e2e_unmarked_sessions_upload_normally(tmp_path, monkeypatch):
"""Control case: with no /agnes-private call, both sessions upload.
Proves the e2e tests above are exercising the privacy filter, not
some unrelated reason the upload didn't fire."""
_stub_push_config(monkeypatch)
calls = _record_uploads(monkeypatch)
t1 = tmp_path / "a.jsonl"
t1.write_text("{}\n")
t2 = tmp_path / "b.jsonl"
t2.write_text("{}\n")
_capture(tmp_path, "sid-a", t1, monkeypatch)
_capture(tmp_path, "sid-b", t2, monkeypatch)
result = runner.invoke(push_app, ["--quiet"])
assert result.exit_code == 0, result.output
uploaded = sorted(_uploaded_session_names(calls))
assert uploaded == ["a.jsonl", "b.jsonl"], (
f"Both unmarked sessions should upload; got: {uploaded}"
)
# No private-skipped audit entries either — nothing was marked private.
assert not private_skipped_log_path(tmp_path).exists()