Pre-fix: when v24 migration found rows to migrate but
data_source.bigquery.project was empty, it logged a warning per row
and returned normally. Schema_version then bumped to 24 unconditionally
→ next start's 'if current < 24:' gate skipped _v23_to_v24_finalize
forever, leaving rows in DuckDB-flavor SQL that the new
_wrap_admin_sql_for_jobs_api wrapping path rejects.
Devin escalated this from advisory ("idempotent retry") to critical
on rescan after my reply. The reply was wrong — the LIKE filter inside
the function gives idempotency IF the function is called again, but
the schema-version gate prevents that call from happening.
Fix (Devin's recommended Approach 1): raise RuntimeError BEFORE the
schema-version bump when rows need migration but project_id is empty.
The schema_version stays at 23, so on next start the 'if current < 24:'
gate fires and the migration runs again — this time with project_id
configured.
Side effect: a BQ-using deployment that hasn't set the project blocks
startup until they do. That's the right call for a config error that
would otherwise silently break all materialized tables. The error
message points at the right knob (data_source.bigquery.project +
restart).
No-rows-no-block invariant preserved: the early 'if not rows: return'
at the top of _v23_to_v24_finalize means non-BQ deployments are
unaffected.
Tests:
- test_v24_raises_when_project_not_configured_and_rows_need_migration:
asserts raise + schema_version stays at 23 (the load-bearing
invariant for retry-on-next-start to work)
- test_v24_skips_clean_when_no_rows_match_even_without_project:
asserts non-BQ deployments don't block startup
- Existing 3 tests still pass
Three items from operator feedback after running the actual flow:
(1) Help docstring lied: "--bucket / --source-table ignored" for
materialized rows. Reality: --bucket is load-bearing because
`agnes schema <name>` builds the BQ identifier as
`bq.<bucket>.<source_table>`. An empty bucket registered the row but
broke schema/describe with HTTP 400 "unsafe BQ identifier in
registry". Fix: docstring rewritten to reflect reality, plus
client-side validation rejects materialized + empty bucket with a
clear error pointing at the right knob.
(2) Post-register UX cliff: `agnes pull` after register-table reports
"Updated 0 tables (1 total)" because registration adds a registry
row but does NOT trigger a parquet build. Operators routinely
assume something's broken when they need to run
`agnes setup first-sync` to kick off the materialization. Hint
emitted on success now points at first-sync.
(3) RBAC gotcha: `agnes catalog` is RBAC-filtered via
`resource_grants`, so non-admin users don't see freshly-registered
rows until a grant is created. Hint emitted on success now points at
`agnes admin grant create <group> table <name>`.
Tests: 8/8 in test_cli_admin_materialized.py, including two new
regression tests for the validation + the hint output.
The iterative bare-name rewriter (one re.sub per name, longest-first)
was vulnerable to cross-contamination when the GCP project ID contained
a registered table name as a hyphen-delimited word.
Concrete repro:
project = 'my-ue-project'
registered = ['orders', 'ue']
user SQL = 'SELECT * FROM orders JOIN ue ON ...'
iter 1 (orders): produces 'FROM `my-ue-project.fin.orders` JOIN ue ...'
iter 2 (ue): '\bue\b' matches 'ue' INSIDE 'my-ue-project' (hyphen
creates word boundary on both sides) — corrupts
the iter-1 path
Fallback at query.py:576 caught the resulting BQ parse error and fell
back to per-table SELECT * estimate, so impact was over-estimation,
not fail-open — but the #171 partition-pruning fix silently degraded
to pre-fix behavior whenever a project name shared a hyphen-segment
with a registered table.
Fix: single re.sub call with an alternation regex sorted longest-first.
Single-pass means each source position is processed exactly once, so
freshly-inserted backticked text from one match isn't re-scanned by
later names in the alternation.
Regression test
test_rewrite_helper_does_not_corrupt_when_project_id_contains_registered_name
covers the exact Devin repro.
`_try_acquire_file_lock` opened the lock file with `open(mode='w')`
BEFORE the mtime check, which truncated the file and refreshed mtime
to now. The subsequent age check always saw ~0, so the TTL reclaim
branch was never reachable and `materialize.lock_ttl_seconds` was
a silently no-op config knob.
Repro:
before open(w): mtime age = 100000s
after open(w): mtime age = 0s
Fix: stat the lock path BEFORE any open(). If pre-probe mtime is
older than TTL, unlink (forcing a fresh inode for the open + flock
that follows). Order is now stat-then-decide-then-probe, not
probe-then-stat-then-decide.
Two regression tests added in tests/test_bq_materialize_concurrency.py:
- test_stale_held_lock_is_reclaimed_despite_live_holder — exercises
the full reclaim path with a still-living fcntl holder. Pre-fix
this returned None (in_flight forever); post-fix returns a holder
fd on a new inode.
- test_failed_probe_does_not_self_refresh_lock_mtime — sister test
pins that a failed acquisition's mode='w' truncate doesn't
pathologically loop.
Residual cross-process risk (genuinely overrunning materialize past
TTL races a fresh attempt — both write to the same parquet.tmp,
inode-level flock independence means new acquisition succeeds while
old holder is still alive) stays documented in the helper docstring.
In-process threading.Lock keyed on table_id blocks the single-process
race; cross-process protection relies on TTL being well above
longest plausible COPY (24h default).
Adds `test_unified_flow_uses_only_agnes_verbs` that asserts no `da `
substring (with trailing space, to dodge false positives on `Darwin` /
`database` / `adapter`) appears in any of the four
`resolve_lines()` shapes:
- bare (no plugins, no ca)
- plugins only
- ca only
- plugins + ca
Also pins the `agnes init --server-url … --token …` shape — commit
8784f10a's stale-on-disk-token fix relies on `init` receiving an
explicit `--token` argument; if a future refactor drops the flag from
the emitted command the test fails loudly instead of silently
regressing to 401-on-stale-token in production.
Plan: docs/superpowers/plans/2026-05-04-unified-setup-prompt.md task 10.
The `/setup` route no longer accepts `?role=analyst|admin`. The route
signature drops the `Literal[...] = Query(...)` parameter and the
silent admin-downgrade block (`if role == "admin" and not is_admin:
role = "analyst"`). The `role` ctx variable threaded into install.html
also goes away — Task 6 cleans up the template's role-tile UI and the
JS PAT-mint ternary.
`?role=` is silently ignored by FastAPI for unknown query params, so
existing bookmarks (none in production — the param was added in this
PR and never shipped) just degrade to the unified layout. No
RedirectResponse shim needed.
Tests: drop the entire `tests/test_setup_page_roles.py` file (eight
role-branching tests that no longer apply) and add
`tests/test_setup_page_unified.py` with three tests:
- `test_setup_page_renders_unified_layout`
- `test_setup_page_ignores_role_query_param`
- `test_setup_page_renders_marketplace_for_user_with_grants`
- `test_install_legacy_path_redirects_to_setup`
Also replace the role-aware `test_install_preview_*` tests in
test_web_ui.py with unified-layout assertions.
Plan: docs/superpowers/plans/2026-05-04-unified-setup-prompt.md task 5.
Removes the `role: Literal["analyst", "admin"] = "admin"` parameter from
`compute_default_agent_prompt`. The same RBAC pass
(`marketplace_filter.resolve_allowed_plugins`) now runs for every user —
admin or not. Users with no `resource_grants` rows get the
no-marketplace layout; users with grants get the marketplace block
inserted. Admin-vs-analyst is no longer a layout branch.
`render_agent_prompt_banner` no longer derives a `role` from
`user.is_admin`; it just delegates to `compute_default_agent_prompt`.
Two `compute_default_agent_prompt(...role=role)` call sites in
`app/web/router.py::setup_page` are updated to drop the keyword so the
route keeps rendering — Task 5 will remove the `?role=` query
parameter and the silent admin-downgrade block from the route signature
itself.
Tests: drop role-aware assertions from test_welcome_template_renderer
and test_welcome_template_api. Both files now assert the unified
default contains `agnes init` + `uv tool install` and bans the legacy
`agnes auth import-token` / `agnes auth whoami` verbs.
Plan: docs/superpowers/plans/2026-05-04-unified-setup-prompt.md task 4.
Renames `_git_check_block` to `_preflight_block` and adds a
`claude --version` check beside `git --version`. Both binaries are
required by the marketplace step — git for the clone fallback,
claude for `claude plugin marketplace add` / `claude plugin install` —
so checking them together gives one clear failure instead of two
confusing downstream errors.
Install hints: `npm i -g @anthropic-ai/claude-code` for Linux / WSL
plus a doc URL (https://docs.claude.com/claude-code) for the native
macOS / Windows installers. We don't try to one-line a native
installer; the canonical instructions live upstream.
Plan: docs/superpowers/plans/2026-05-04-unified-setup-prompt.md task 3.
Adds `_step_numbers(*, has_marketplace, has_skills)` so step numbering
lives in one place instead of being split across three branches in
`resolve_lines`. Pins the unified layout in the tests:
No plugins: 1 install, 2 init, 3 catalog, 4 diagnose, 5 skills, 6 confirm
With plugins: 1, 2, 3, 4 preflight, 5 marketplace, 6 diagnose, 7 skills, 8 confirm
`agnes auth import-token` / `agnes auth whoami` are now banned from the
rendered prompt — `agnes init` subsumes them. The renamed
`test_resolve_lines_no_plugins_unified_six_step_layout` asserts those
strings are absent and that the new step headers (`Bootstrap your Agnes
workspace`, `Verify the data is queryable`) are present.
Plan: docs/superpowers/plans/2026-05-04-unified-setup-prompt.md task 2.
Removes the `role: Literal["analyst", "admin"]` parameter from
`resolve_lines` / `render_setup_instructions` and deletes the
`_resolve_analyst_lines`, `_analyst_init_lines`, `_analyst_finale_lines`
helpers. The unified flow now always emits `agnes init` (the
workspace-rails delivery mechanism) in place of the legacy
`agnes auth import-token` + `agnes auth whoami` pair, and uses
`agnes catalog` as the smoke-verify step.
`agnes init` already verifies the PAT internally, and `agnes catalog`
doubles as a data-plane smoke check, so dropping `agnes auth whoami`
costs no signal.
Drops the now-redundant `tests/test_setup_instructions_analyst.py` and
patches the one ordering test in `tests/test_setup_instructions.py` that
referenced the old "Log in" / "Verify the login" headers. Also strips
the `role=role` kwarg from `compute_default_agent_prompt`'s call into
`resolve_lines` so the welcome-template render path keeps working;
welcome_template.py's own role param is removed in a follow-up task.
Plan: docs/superpowers/plans/2026-05-04-unified-setup-prompt.md task 1.
Three Devin Review findings on PR #173 addressed in one commit since
they're in adjacent code paths:
1. cli/commands/init.py:99 (\u{1F534}): `agnes init --token NEW` ran
step 2 verify against the OLD on-disk token because `get_token()`
read `~/.config/agnes/token.json` before the env var, and
`_override_server_env` only set the env var. So `agnes init --force`
on a machine with a stale token.json failed 401 with a confusing
'token expired' even though the --token arg was valid.
Fix: ContextVar-based override in `cli.config._token_override`
checked by `get_token()` BEFORE the on-disk read.
`_with_token_override` context manager scopes the override.
`_override_server_env` now also sets the contextvar via
`_with_token_override(token)`, so both env var and contextvar
carry the override (env for back-compat with anything bypassing
get_token; contextvar is the authoritative source).
Async-safe (each task sees its own override) and leak-proof
(resets on context exit).
2 new tests: regression on stale-disk-token + scope leak guard.
2. cli/commands/status.py:43 (\u{1F7E1}): sessions_pending_upload only
checked legacy `<workspace>/user/sessions/` and always reported 0
in workspaces bootstrapped with `agnes init` (Claude Code writes
to `~/.claude/projects/`, not the legacy path). Same bug we fixed
for `agnes push` in 08e49591.
Fix: route through `cli.lib.claude_sessions.list_session_files()`
so status and push agree on what counts as a pending session.
3. connectors/bigquery/extractor.py:111 (\u{1F7E1}): docstring claimed
"a live holder still wins the second flock attempt" — incorrect on
Linux. After `unlink()` + `open()`, the new file is a new inode;
fcntl.flock keys per-inode, so the old holder's lock does NOT block
the new acquisition. In a genuine TTL-overrun scenario two writers
CAN race the parquet.tmp.
Fix: documentation only. Comment now honestly describes the
inode-recreation behavior, names the threading.Lock as the actual
in-process guard, and flags pid-gating as the next-iteration fix
if real corruption surfaces. The 24h default TTL is well above
typical COPY durations so the practical risk is low.
Tests: 17/17 across test_cli_init.py + test_lib_pull.py + the broader
regression set.
Sweep operator runbooks (docs/QUICKSTART, docs/HEADLESS_USAGE,
docs/architecture, docs/sample-data, docs/agent-workspace-prompt,
docs/metrics/metrics.yml, dev_docs/server, dev_docs/disaster-recovery),
the corporate-memory service README, the jira connector README + backfill
scripts, the deploy skill, and test docstrings. Replaces `da sync` →
`agnes pull`, `da analyst setup` → `agnes init`, `da metrics ...` →
`agnes catalog --metrics` / `agnes admin metrics ...`, `da fetch` →
`agnes snapshot create`, plus the matching docker-compose admin
invocations.
Vendor-specific `/opt/data-analyst/` install paths in jira backfill /
consistency scripts and operator docs are replaced with the
placeholder `<install-dir>` and a new `AGNES_ENV_FILE` env-var override
that lets a deployment inject its actual install path without a code
change. Aligns with the OSS vendor-agnostic policy in CLAUDE.md.
CHANGELOG `### Internal` entry summarizes the audit and reaffirms the
intentional stale-marker tuples (`_LEGACY_STRINGS`, `_OUR_COMMAND_MARKERS`)
that must keep referencing `da sync` / `da fetch` / etc. for hook upgrade
and override-detection logic.
Pre-fix `agnes pull` decided what to download from sync_state hash
equality alone:
if server_hash != local_hash or tid not in local_tables or not server_hash:
to_download.append(tid)
If the recorded local hash matched server but the actual parquet had
been deleted from disk, the download was skipped. The next DuckDB
view rebuild then fails on a missing file. Repro: `rm
server/parquet/X.parquet && agnes pull` → 'Updated 0 tables', X
still missing.
Failure modes that produce hash-equal-but-file-missing:
- manual `rm` of a single parquet
- operator-side cleanup of `server/parquet/`
- two workspaces sharing one user's
`~/.config/agnes/sync_state.json` (TODO(workspace-scoped-sync-state)
in pull.py): one workspace writes its parquets, the other reads
sync_state and concludes 'I already have these'
- disk corruption / partial restore from backup
Fix: existence check runs alongside the hash compare. Missing file
forces a re-download regardless of hash equality. `parquet_dir` is
hoisted above the loop so the existence check is in scope when the
download set is built.
Tests: regression test for the hash-equal-but-missing-file case +
counterpart for the fast-path (hash-equal-and-file-present must
still skip).
Closes#171. The /api/query cost guardrail used to dry-run a synthetic
`SELECT * FROM <table>` for each registered remote-BQ row referenced
by the user SQL — which made BigQuery estimate a full table scan, with
column projection, predicate pushdown, and partition pruning all
disabled. Narrow queries on big partitioned/clustered tables (the
documented happy path for `agnes query --remote`) hit ~30,000×
over-estimates and got rejected with 400 `remote_scan_too_large` even
when BQ's own dry-run reported single-digit MB.
Pavel's report on #171 traced the root cause and proposed the fix:
rewrite the user SQL to BQ-native syntax and dry-run it as a single
job, exactly the way `bq query --dry_run` works.
Implementation:
- New helper _rewrite_user_sql_for_bq_dry_run rewrites bare registered
names (word-boundary, case-insensitive, longest-first to avoid prefix
collisions) + bq."<ds>"."<tbl>" forms to backticked
`<project>.<ds>.<tbl>` paths.
- _bq_quota_and_cap_guard runs ONE dry-run on the rewritten SQL. Cap
check uses the real estimate.
- Fallback path: if BQ rejects with bq_bad_request (e.g. DuckDB-only
syntax like ::INT casts), the guard falls back to the pre-fix
per-table SELECT * approach so non-portable queries still get a
(loose) cap estimate instead of fail-opening. Non-parse BQ errors
(forbidden, upstream) still propagate as 502.
- _bq_guardrail_inputs now also returns name_lookups so the rewriter
has the (registered_name, bucket, source_table) mapping it needs.
- Per-table breakdown is unavailable from a composite dry-run; total
bytes are pinned to dry_run_set[0] for the post-flight
record_bytes(sum(...)) call to keep returning the right total.
Tests (7 new, 3 existing still pass):
- dry-run receives rewritten user SQL with WHERE clause intact (the
load-bearing assertion for #171)
- single dry-run per request even with multiple registered tables
(JOIN, UNION) referenced
- fallback to per-table SELECT * on bq_bad_request
- non-parse BQ errors (forbidden) still 502
- rewriter unit tests: bare + bq.path in same SQL, longest-name-wins
on prefix collision, case-insensitive bare-name match
The renderer no longer emits the legacy "da analyst setup" verb (the analyst
flow uses `agnes init`, the admin flow uses `agnes auth import-token`). The
disjunction assertions ("da analyst setup" OR "agnes auth" OR "curl") were
permissive and would have silently kept passing even if the renderer
regressed. Replace them with role-aware assertions that match the actual
emitted markers and explicitly check that no legacy verb survives.
Four call sites where #174 (branched from main before the agnes rename
fully landed in some files) emitted or referenced `da fetch`. None are
operator-visible runtime crashes — but `extractor.py` logs a stale
verb to the operator log and `DATA_SOURCES.md` is current docs:
- connectors/bigquery/extractor.py:431,434 (operator-facing log line on
unverified BQ entity_type — was suggesting `da fetch`).
- docs/DATA_SOURCES.md:77,85 (current public docs, two refs to
`da fetch` in the workflow + the BQ scope description).
- tests/test_cli_query_render.py:7 (module docstring listed
`da fetch / agnes schema / etc.` — now `agnes snapshot create / agnes
schema / etc.`).
- tests/test_cli_snapshot_create.py:1 (docstring referenced `(folded
from `da fetch`)` — historical, removed; no value once the rename
landed).
Pre-existing stale `da` references elsewhere in the branch (templates,
operator runbooks, internal comments) are not touched by this commit —
they live outside the merge surface and are a separate cleanup task.
Verified: 10/10 across the affected test files pass.
The dashed identifier is what the test exercises (backticks required for
dashed BQ project IDs); the literal string can be any synthetic value.
'prj-grp' is too close to a real customer-prefix pattern that the OSS
vendor-scrub regex flags. 'my-project' matches placeholders used elsewhere
in the project.
Real bug: `agnes push` was reading `<workspace>/user/sessions/`, but
Claude Code writes session jsonls to `~/.claude/projects/<encoded-cwd>/`
and nothing on the analyst side ever copies them across. The SessionEnd
hook ran `agnes push` happily and uploaded zero sessions every time.
`cli/lib/claude_sessions.py` probes both Claude Code encoding variants
(older `/`→`-` keeping spaces+tildes; newer all-non-alphanumeric→`-`
with collapsed runs) and unions whichever exist. Users who upgraded
Claude Code mid-project end up with both encoded dirs side-by-side on
disk; the union ensures no session is left behind. Same-named jsonl in
both dirs → newest mtime wins. `<workspace>/user/sessions/` survives as
a fallback for any setup that explicitly mirrors sessions there.
Verified on real disk: helper returns 2 dirs + 8 unioned session files
for the Agnes-test workspace where the previous code returned 0.
Three coupled UX fixes for the analyst-onboarding flow:
1. Dashboard "Setup a new Claude Code" CTA was rendering admin paste
prompt for everyone (analysts couldn't actually execute the marketplace
plugin install / skills setup steps). render_agent_prompt_banner now
picks role based on user.is_admin — analysts get the analyst flow.
2. /setup default role changed from admin to analyst. Most visitors are
analysts; admin layout is opt-in via the admin tile or ?role=admin.
3. Admin tile is admin-only on the role-tile nav. Non-admins see only
the analyst tile. Server-side: non-admin requesting ?role=admin is
silently downgraded to analyst (otherwise they'd see admin paste
prompt despite no tile).
Tests:
- New: test_setup_page_admin_tile_hidden_for_non_admin (anonymous client
can't see "Admin CLI" or role=admin link)
- New: test_setup_page_admin_role_downgraded_for_non_admin (anonymous
?role=admin → analyst layout, no marketplace step in clipboard)
- New: test_install_preview_default_role_is_analyst (admin signing in to
bare /setup gets analyst clipboard by default)
- Renamed: test_setup_page_default_role_is_admin → ..._is_analyst
- Updated: test_setup_page_admin_clipboard_renders_admin_layout uses
FastAPI dependency_overrides to inject admin user (admin layout is
now admin-gated)
- Updated: test_install_preview_visible_for_signed_in_user explicitly
passes ?role=admin to exercise admin layout
Caught by my own broader test scope after Devin fixes — three test files
asserted on user-visible strings that were renamed by the bootstrap PR
but the assertions weren't updated:
- tests/test_api_query_guardrail.py:110 — asserted `da fetch in suggestion`
on /api/query 400 response. Renamed to `agnes snapshot create`.
- tests/test_query_materialized_error_message.py:56 — asserted `da sync`
in materialized-not-yet error detail. Renamed to `agnes pull`.
- tests/test_cli_error_render.py:71 — fixture data + assertion both
carried `da fetch`. Updated to `agnes snapshot create`.
Plus an actual content miss: docs/setup/claude_settings.json (a template
shipped to operators) still installed `da sync` / `da sync --upload-only`
hooks. The companion test file (tests/test_setup_hooks_template.py) was
asserting that legacy state. Updated both:
- Template hooks: `agnes pull --quiet` / `agnes push --quiet`
- Test assertions + function name match the new commands
13 Devin findings across 10 files:
🔴 Critical:
- app/api/v2_catalog.py:42 — `_fetch_hint` returns `da fetch` in /api/v2/catalog
responses (user-visible in every catalog list)
- cli/skills/agnes-data-querying.md — 11 stale `da fetch`/`da sync` refs in the
bundled skill markdown
- config/claude_md_template.txt:38 — referenced `agnes pull --docs-only` flag
that does NOT exist in agnes pull (removed; spec only ships --quiet/--json/
--dry-run)
🟡 Important:
- app/api/admin.py:252 — `da fetch` in bq_max_scan_bytes hint
- cli/commands/auth.py:119 — `da sync` in import-token docstring (--help text)
- cli/commands/tokens.py:48 — "Export it so `da` can use it" prose
- ARCHITECTURE.md — 4 stale rows in CLI commands table
- README.md — stale paragraphs for analysts (da sync, da analyst setup)
🚩 Substantive observations addressed:
- app/api/query.py:249,302,489 — server-side error/help strings still said
`da sync`/`da fetch` (returned in API responses to clients)
- cli/commands/snapshot.py:235-241 — DuckDB existence guard incorrectly
blocked `--estimate` (server-side dry-run that never opens local DB).
Added test ensuring estimate path skips the guard.
Skipped (intentionally historical):
- app/api/admin.py:2377,2429,2437 — historical comments describing past
manifest-vs-sync_state bug; past tense, accurate to keep as `da sync`.
Typer/rich emits ANSI styling in CI's --help output (e.g. `--metrics`
becomes `-\x1b[0m\x1b[1;36m-metrics`), so literal substring asserts
like `assert "--metrics" in result.output` fail. Locally the test runner
auto-detects no-TTY and produces plain text, masking the issue.
Add a small `_clean()` helper per test file that strips ANSI escape
codes (`\x1b\[[0-9;]*m`) before substring containment checks.
- _v23_to_v24_finalize: wrap row-update loop in BEGIN/COMMIT/ROLLBACK
to match the project's transactional-finalizer pattern (compare
_v12_to_v13_finalize, _v17_to_v18_finalize, _v18_to_v19_finalize).
Pre-fix a process crash mid-loop left the schema_version unchanged
but partially-converted rows persisted across restart — idempotent
overall but inconsistent with project convention.
- _v23_to_v24_finalize: re.sub replacement now uses a function-form
(lambda) instead of an f-string, so any future project_id with a
backslash sequence isn't misinterpreted as a group reference.
- tests: add a Keboola-source materialized row case asserting the
SELECT's source_type filter prevents non-BQ rewrites.
Materialize now wraps admin SQL into bigquery_query('<billing>', '<inner>')
which requires the inner SQL to be BigQuery-flavor (backticked
identifiers, native function syntax). v24 migrates existing rows from
DuckDB-flavor (bq."ds"."tbl") to (`<project>.ds.tbl`) using the
configured BQ project. Idempotent on already-converted rows; logs a
warning and skips when the project isn't configured (operator can
configure + restart for retry).
Task 20: reusable pytest fixtures for the clean-bootstrap test suite.
Tasks 21 and 22 (reader smoke matrix + init smoke matrix) consume them.
- fastapi_test_server boots a real uvicorn subprocess against a tmp DATA_DIR,
pre-seeded with admin@example.com (Admin group), analyst@example.com
(Everyone group), and three tables (one per query_mode: local /
materialized / remote).
- web_session: cookie-authenticated httpx.Client for the admin user.
- test_pat: minted JWT for the analyst with table grants on local +
materialized.
- test_pat_no_grants: same shape, zero resource_grants.
- zero_grants_workspace: subprocess invocation of `agnes init` against the
no-grants PAT; returns the bootstrapped workspace path.
- NONEXISTENT_TABLE: module-level sentinel for the upcoming reader matrix.
Subprocess uvicorn (mirrors tests/test_e2e_corporate_memory.py) instead of
in-thread so DATA_DIR + module-level singletons in src.db don't bleed
across tests. agnes CLI invoked via `python -m cli.main` instead of the
.venv/bin/agnes shim, which depends on .pth file visibility that iCloud
Drive intermittently re-hides on macOS.
New top-level 'materialize' section, single field (lock_ttl_seconds).
Default 86400 (24h). Backs the file-lock TTL reclaim added in the
per-table-mutex change. Editable via PUT /api/admin/server-config and
the /admin/server-config UI.
When admin registers a materialized BQ row with bucket+source_table but
no source_query, the server generates 'SELECT * FROM `<project>.<ds>.<tbl>`'
from instance.yaml's configured BQ project. Same fallback fires on PUT
when flipping to materialized. The backtick rejection guard, which was
appropriate for DuckDB-flavor source_query, is relaxed for materialized
rows since the new wrapping path (Task 2) runs admin SQL through BQ
jobs API which uses BQ-native syntax (backticks for dashed identifiers).
_run_materialized_pass distinguishes due-check skips from in-flight
skips and never calls state.set_error for either. summary['skipped']
becomes a list of {table, reason} dicts; the end-of-pass log line
breaks out the in_flight subcount.
Hoists is_table_due to module-level import so test monkeypatching of
the symbol intercepts the call (the previous local import made
patches a no-op).
- extractor._try_acquire_file_lock: close fd and re-raise on non-
BlockingIOError from fcntl.flock (read-only fs, unsupported flock,
fd exhaustion). Pre-fix the fd leaked silently and the underlying
OSError still propagated past the caller.
- extractor: reorder module-level layout so logger is bound before
the new lock-related helpers reference it. Deferred import of
app.instance_config inside _get_lock_ttl_seconds documented inline.
- extractor: comment _table_locks unbounded-by-design rationale.
- tests: docstring + monkeypatch-target rationale for the two
concurrency tests where the contract isn't obvious from the body.
Two Task 4 review fixes for app/web/templates/install.html:
1. JSON-escape `ROLE` JS const via `{{ role | tojson }}` (defense in
depth — removes the dependency on Jinja autoescape semantics for JS
contexts; FastAPI's Literal validator already constrains role values).
2. Verify the analyst tile's clipboard payload is the analyst layout.
The pre-existing role-aware plumbing (compute_default_agent_prompt
threading role into setup_instructions_lines, picked up by the JS
SETUP_INSTRUCTIONS_TEMPLATE array) was correct; adding regression tests
that pin to the JS clipboard block specifically so a future inversion
would fail loudly.
Tests: analyst clipboard contains `agnes init` + `agnes catalog` and
NOT `agnes auth import-token` / `agnes skills`; admin clipboard is the
inverse. Plus an explicit assertion that ROLE is rendered via tojson.
Two layers of concurrency control. Layer 1 is a per-table_id
threading.Lock keyed on table_id; Layer 2 is fcntl.flock on a sibling
<id>.parquet.lock file. Overlapping calls for the same id raise
MaterializeInFlightError, which the caller treats as 'skipped,
in_flight' instead of a hard error. Stale file locks (mtime older
than materialize.lock_ttl_seconds, default 86400) are reclaimed on
the next attempt — covers the rare case where a holder was hard-killed
before kernel-level flock release.
Pre-fix, when a materialize ran longer than the scheduler tick interval
(15 min), the next tick called materialize_query for the same id, hit
the unconditional tmp_path.unlink() at function entry, and started a
second COPY against the same path. Both writers interleaved bytes;
the original COPY's read_parquet validation then failed with
'No magic bytes found at end of file'.
